|Delivery time:||within 5 working days|
Relay module with 4-pole relay with forcibly guided contacts according to IEC 61810-3, application type A for mounting on 35 mm rail. With notched-crown contacts for switching currents from 3 mA to 8 A ideally suited for both monitoring circuits and load circuits.
Simplified installation due to plug-in terminals with screw and push-in technology.
Display of the control and protective circuitry are already an integral part of the module. Shortest possible release times of the switching contact are guaranteed by the use of a TVS diode.
Switching current: 3mA - 8A
Test voltage (rms): 4000V
The following product variants are available in the ELESTA shop:
Maximum one packing unit available, contains 24 pieces.
|Number of Contacts NO:||3|
|Number of Contacts NC:||1|
|Contact Material:||AgCuNi + 0,2 ... 0,4 μm Au|
|Contact Type (Output Contacts):||Single contact with notched crown|
|Switching Current Range:||3 mA ... 8 A|
|Test Voltage open Contact (rms):||1500 Vrms / 1 min|
|Length in mm:||100|
|Width in mm:||17,5|
|Height in mm:||120|
|Type of Protection:||IP20|
|Areas of Application:||Access control, interfaces, elevators, escalators, transportation, robots, machine tools and railway applications|